semi-electric stacker, semi-electric pallet stacker

Semi-electric Stacker is an industrial material handling vehicle powered by battery. It is a very useful and essential equipment for transporting pallets and containers. This series have gained the CE certificate, and is designed to operate in narrow passages and limited space. They are ideal to use for loading and unloading. It features easy operation with little noise and pollution than trucks, and low malfunction rate.

This Semi-Electric Pallet Stacker is suited for intensive handling and continuous lifting. The compact design and smooth steering ensures a small turning radius 1500mm (60inch） and easy operation.

이 반 전기 팔레트 적재기는 최대 하중 용량이 1000kg (2200lbs)입니다. 이 전기 적재기는 모든 차고, 작업장 또는 창고에서 무거운 하중을 다루는 데 적합합니다!

디자인을 개선하면 더 많은 노동력을 절약하고 내구성을 높일 수 있습니다.

세미 스태커 유형 :

수년 동안 전문 스태커 제조 업체로서, 우리는 포크 타입 스태커, 전기 스태커, 세미 전기 작업 포지셔너, 핸드 스태커, 전기 스태커, 플랫폼 스태커, 롤러 스태커 등 다양한 스태커를 개발했습니다 ...

세미 스태커의 기술 매개 변수 :

모델	ART052	ART053	ART054	ART055	ART056	ART057
유형	반 전기	반 전기	반 전기	반 전기	반 전기	반 전기
용량 kg (lbs)	1000(2200)	1000(2200)	1000(2200)	1000(2200)	1000(2200)	1500(3300)
로드 센터 mm (인치)	600(23.6)	600(23.6)	600(23.6)	600(23.6)	600(23.6)	600(23.6)
포크 높이 (최소 최대) mm (인치)	85-1600 (3.3-63)	85-2500 (3.3-100)	85-2900 (3.3-114.2)	85-3100 (3.3-122)	85-3300 (3.3-130)	85-1600 (3.3-63)
로드 센터 mm (인치)	600 (23.6)	600 (23.6)	600 (23.6)	600 (23.6)	600 (23.6)	600 (23.6)
포크 길이 mm (인치)	1150 (45.3)	1150 (45.3)	1150 (45.3)	1150 (45.3)	1150 (45.3)	1150 (45.3)
최소. 선삭 반경 mm (인치)	1377 (54.2)	1377 (54.2)	1377 (54.2)	1377 (54.2)	1377 (54.2)	1377 (54.2)
하중 mm / s (인치 / s)로 리프팅 속도	70 (2.75)	75 (3)	75 (3)	75 (3)	80 (3.1)	75 (3)
하중없이 상승 속도 mm / s (인치 / 초)	95 (3.7)	95 (3.7)	100 (3.9)	105 (4.1)	110 (4.3)	95 (3.7)
하중 mm / s (인치 / s)로 하강 속도	0-400 (0-15.7)	0-400 (0-15.7)	0-400 (0-15.7)	0-400 (0-15.7)	0-400 (0-15.7)	0-400 (0-15.7)
하중없이 속도 하강 mm / s (inch / s)	0-180 (0-7)	0-180 (0-7)	0-180 (0-7)	0-180 (0-7)	0-180 (0-7)	0-180 (0-7)
포크 전체 너비 mm (인치)	550 (21.7)	550 (21.7)	550 (21.7)	550 (21.7)	550 (21.7)	550 (21.7)
단일 포크 너비 (mm)	160 (6.3)	160 (6.3)	160 (6.3)	160 (6.3)	160 (6.3)	160 (6.3)
파워 팩 (KW)	1.5	1.5	1.5	1.5	1.5	1.5
견인 배터리 (V / Ah)	12/100	12/100	12/100	12/100	12/100	12/100
충전기 (A / V)	12/18	12/18	12/18	12/18	12/18	12/18

세미 스태커의 특징 :

1. 전기 리프팅, 수동 이동.
2. 모든 휠에는 작업 중 안전을 보장하는 안전 장치가 있습니다.
3. 리프팅 높이 옵션 : 1600 ~ 3300mm (63inch ~ 130inch)
4. 포크 크기 : 45.3 "L × 6.3"W. 21.3 "(전체 포크 폭) 포크 재질 두께는 0.65"에 도달 할 수 있습니다.
5. 들어 올리는 속도 : 그것은 짐을 가진 정상에 대략 45s 및 짐없이 대략 30s를 다만 요구한다.
6. 무료 배터리 유지 보수, 약 4-5 시간 동안 100Ah / 12V 작업 시간.
7. 중부 하 설계 및 최고 품질의 마스트 구조.
8.로드 롤러와 스티어링 휠의 안전 장치.

판매 후 서비스 :

각 장비에는 사양 설명서가 함께 제공됩니다.

1 년 제한 보증

우리는 수년간 스태커를 제조 해왔다. 그리고 우리는 전문적이고 완벽한 애프터 서비스 팀과 예비 부품을 지원합니다.

Before use:

Check if the hydraulic line leaks oil
Check that each support wheel is working properly.
Check the energy meter on the instrument panel. It is strictly forbidden to use without electricity.
Press the up and down buttons to check if the semi-electric's lifting and lowering movements are normal.

Precautions:

It is strictly forbidden to press the up or down button while the stacker is walking;
It is forbidden to switch the rising and falling buttons quickly and frequently.
It is strictly forbidden to load heavy objects on the fork quickly.
No overloading is allowed
When using, make sure that the center of gravity of the goods is at the center of the two forks
It is strictly forbidden to place the goods on the fork for a long time.
It is strictly forbidden to place any person and any part of the body under the fork and carrying heavy objects.

Before use:

Check if the hydraulic line leaks oil
Check that each support wheel is working properly.
Check the energy meter on the instrument panel. It is strictly forbidden to use without electricity.
Press the up and down buttons to check if the semi-electric's lifting and lowering movements are normal.

Precautions:

It is strictly forbidden to press the up or down button while the stacker is walking;
It is forbidden to switch the rising and falling buttons quickly and frequently.
It is strictly forbidden to load heavy objects on the fork quickly.
No overloading is allowed
When using, make sure that the center of gravity of the goods is at the center of the two forks
It is strictly forbidden to place the goods on the fork for a long time.
It is strictly forbidden to place any person and any part of the body under the fork and carrying heavy objects.

스태커 제조업체 :

재료 취급 및 리프팅 제품의 다양한 유형의 전문 제조업체로서 스태커가 당사의 주요 제품입니다. 이 외에도, 우리는 또한 다양한 종류의 팔레트 트럭, 작업 포지셔너, 리프트 테이블, 지게차, 크레인 등을 생산할 수 있습니다.

Common faults and solutions：

1. The speed of the drive wheel of the stacker is significantly lower or the drive motor is seriously overloaded.

Check the reason: the battery voltage is too low or the contact resistance of the pile head is too large; the carbon deposit between the motor commutator causes short circuit between the sheets; the motor brake is not properly adjusted to make the motor run with brake; the drive head gear box and bearing lack lubrication or The base is blocked; the motor armature is shorted.

Treatment method: Check the battery terminal voltage or wash the pile head when the load of the stacker is high; clean the commutator; adjust the brake gap; check the cleaning and refill the lubricating oil, remove the jamming phenomenon; exchange the new motor.

2. the stacker is not able to lift or lift

Check the reason: the gear pump and the pump are over-wearing; the overflow valve in the reversing valve is not high pressure; the oil pressure line is leaking; the hydraulic oil temperature is too high; the gantry carriage has signs of jamming; the oil pump motor speed is too low .

Treatment method: change the wear or gear pump; re-adjust the solution and repair; replace the unqualified hydraulic oil and check the cause of the oil temperature rise; check and mediate; check the motor and remove the obstruction.

3. the stacking of the door frame is difficult to tilt automatically or the movement is not smooth enough

For the sake of investigation: the cylinder wall and the sealing ring are excessively worn; the valve stem spring in the reversing valve is ineffective; the piston is stuck in the cylinder wall or the piston rod is bent; the scale in the tilting cylinder is excessive or the sealing member is too tight.

Solution: Replace O-ring or cylinder; replace qualified spring; replace damaged parts; clean and adjust.

4. the oil pump pressure is insufficient or the rate is too slow

Check the reason: the seal ring inside the pump cover groove is damaged, the internal leakage is excessive; the gear wears; the oil pump motor speed decreases; there is foreign matter in the pipeline blocked.

Treatment method: Replace the oil pump; check the commutator, remove the carbon deposit between the sheets, adjust the position of the carbon brush; check and clean.

5. electrical equipment is not abnormal

Check the reason: the micro-switch in the electrical box is damaged or the position is improperly adjusted; the main circuit fuse or the control electric appliance fuse is blown; the battery voltage is too low; the contactor contacts are singed, or too much dirt causes poor contact; the contact does not move.

Treatment method: change the micro switch, re-adjust the position; exchange the same type fuse; recharge; repair the contact, adjust or change the contactor; check the contactor coil for open circuit or change the contactor.

ART039 윈치 스태커

Winch Stacker ideal for use in various workstation and workplace applications. Maintenance free and easy to use. Full height push handle for easy steering and excellent visibility through welded mesh guard. Forks are raised and lowered by operating the hand...

ART054 반 전기 스태커

Semi-electric Stacker is an industrial material handling vehicle powered by battery. It is a very useful and essential equipment for transporting pallets and containers. This series have gained the CE certificate, and is designed to operate in narrow passages and...